Part Number: 6600-609
Brand: Sundance Spas
PWA: BP2000‑880 60Hz — Sundance® 880 Series Main Board, Revision 1.00
⚠️ IMPORTANT DISCLAIMER – PLEASE READ BEFORE PURCHASING
- There are no refunds or returns on electronic spa parts.
- Please verify compatibility with your hot tub model before ordering.
- All electronic components are covered under the original manufacturer’s warranty.
Overview
Part 6600‑609 is the official 2024 and newer Sundance® 880 Series main system control board for all 1‑pump, 2‑pump, and 3‑pump North American (60 Hz) models. This is the new BP‑platform control board introduced in Mid‑January 2024, replacing all earlier 880 Series circuit boards.
This board supports Sundance’s full suite of 880‑Series technologies including SmartTub®, advanced lighting systems, BP‑series daughter boards, updated safety logic, and modernized pump sequencing.
Compatible Spa Models & Years
✔ Sundance® 880™ Series – Mid‑01/2024 and Newer
Compatible with all 60Hz North American configurations:
- Maxxus®
- Aspen®
- Optima®
- Cameo®
- Marin®
- Altamar®
- Capri®
- Vistamar®
Pump Configurations Supported
- 1‑Pump systems
-
2‑Pump systems (requires daughter board 6600‑608)
-
3‑Pump systems (requires daughter board 6600‑608)
Technical Details
-
Voltage: 240V, North American 60 Hz
-
System Architecture: Balboa BP2000‑880 platform
-
Firmware: Revision 1.00 (‘23A) — new for 2024
-
Pump Support:
- Pump 1 (2‑speed)
- Pump 2 (1‑speed)*
- Pump 3 (1‑speed)*
*Requires daughter board 6600‑608
-
Topside Control Compatibility: 2024+ 880‑Series panels
-
Advanced Features:
- SmartTub® module readiness
- Updated heater safety logic
- BP‑series real‑time diagnostics
- Compatibility with LED lighting & modern Sundance UV/Ozone systems
Purpose & Performance
The 6600‑609 main board controls all critical spa functions:
- Jet pump sequencing & motor control
- Smart heater logic & safety shutoff
- Circulation & filtration cycles
- Temperature control
- Communication with 880‑Series topsides
- SmartTub® wireless integration
- Error detection (FLO, OH, LH, watchdog codes, etc.)
- Daughter‑board logic expansion for multi‑pump loads
Designed to meet new 2024‑era performance, safety, and efficiency requirements, this board is essential for proper operation of all redesigned 880 Series spas.
Related / Required Components
| Part Number |
Description |
| 6600‑608 |
Required daughter board for 2‑ and 3‑pump 880 systems (2024+) |
| 6600‑510 / 6600‑511 |
2024+ 880 Series touchscreens |
| 6560‑xxx |
BP heater/temp/hi‑limit sensors |
| SmartTub Module |
Optional (compatible with 2024+ board) |
Ordering Notes
- For 2‑pump and 3‑pump models, this board MUST be paired with daughter board 6600‑608.
- Verify spa serial number is Mid‑01/2024 or newer.
- Will NOT work in pre‑2024 880 Series spas (those use 6600‑512 / 6600‑514 / 6600‑463 / 6600‑779 families).
- Electronics are non‑returnable once shipped or installed (industry standard).
- Confirm control panel compatibility before installation.
