Part Number: 6600-569
Brand: Sundance Spas
PWA Daughter Board – J‑200 Series (2022+), 2‑Pump BP System, 60Hz
⚠️ IMPORTANT DISCLAIMER – PLEASE READ BEFORE PURCHASING
-
There are no refunds or returns on electronic spa parts.
-
Please verify compatibility with your hot tub model before ordering.
-
All electronic components are covered under the original manufacturer’s warranty.
Overview
Part 6600‑569 is the OEM PWA Daughter Board used in 2022 and newer Jacuzzi® J‑200 Series , and 2022+ Sundance Spas 680 Series Spa control systems built on the Balboa BP (BP21/BP501 derivative) platform. This daughter board provides the expanded pump logic, relay support, and low‑voltage control signals required for 2‑pump, 60Hz North American systems. Used with P/N 6600-566
This board connects directly to the main BP motherboard and functions as an auxiliary control module that manages:
- Pump 1 (2‑speed)
- Pump 2 (1‑speed)
- Heater relay signal routing
- Low‑voltage switching logic
- Safety interlocks (flow, temp, high‑limit integration through the BP platform)
It is required for all 2022+ J‑200 and 2022+ Sundance Spas 680 Series models equipped with dual‑pump plumbing.
Compatible Spa Models & Years
✔ 2022+ Sundance® Spas 680 Series
- Edison
- Ramona
- Peyton
- McKinley
✔ Jacuzzi® J‑200 Series (2022+)
Used in J‑200 spas equipped with two pumps, including:
-
J‑235 (2022+)
-
J‑245 (2022+)
-
J‑275 (2022+)
-
J‑280 (2022+)
Model usage varies by configuration, but all 2‑pump North American J‑200 models beginning in the 2022 production year require this daughter board.
✔ Platform Compatibility
- Balboa BP‑based control boxes shipped with 2022+ J‑200 spas
- Works only when paired with a compatible BP main board
✖ Not compatible with
- 1‑pump J‑200 systems
- Pre‑2022 J‑200 systems (GECKO/YT/x-series boards)
- Any European 50Hz spa systems
Technical Details
-
Board Type: Auxiliary Daughter Board (“PWA”)
-
System Architecture: Balboa BP (Proprietary Jacuzzi‑configured)
-
Frequency: 60 Hz (North America only)
-
Pump Control:
-
Pump 1: 2‑speed
-
Pump 2: 1‑speed
-
Connections:
- Low‑voltage ribbon / daughter‑card connector
- Relay output for motors
- Signal routing for heater enable
-
Mounting: Internal to control box (secured to PWA rail or riser mounts)
-
Supports:
- Standard 5.5 kW BP heater
- Flow/temperature/hilimit sensors through the BP architecture
- J‑200 topside control protocol
Purpose & Performance
The 6600‑569 Daughter Board expands the capabilities of the BP main board to operate a full 2‑pump hydromassage system, providing:
- Independent operation of Pump 1 and Pump 2
- Proper sequencing for heat‑with‑pump logic
- High‑current motor relay control
- Overheat & safety‑limit interlock routing
- Compatibility with Jacuzzi® J‑200 control panels
- Stable 60Hz operation for North American electrical standards
This module is essential for restoring correct spa operation in any 2022+ J‑200 spa experiencing:
- Non‑responsive pumps
- Heating interlock faults
- Incorrect high‑speed switching
- Relay clicking / cycling
- Dead secondary pump
Related / Companion Components
| Part Number |
Description |
| Main BP Board (varies by pack) |
Required host board for 6600‑569 |
| 6560‑xxx Sensors |
Temperature & hi‑limit (BP system) |
| 6500‑xxx Heater |
BP compatible 5.5 kW heater |
| 6600‑xxx J‑200 Topside |
Control panel tied to BP system |
Ordering Notes
- Only for 2022+ Jacuzzi® J‑200 Series with 2‑pump systems and Sundance® Spas 2022+ 680 Series
- Must be installed inside the BP control pack; not a standalone controller.
- Not cross‑compatible with Sundance systems or older Jacuzzi electronics.
- Electronics are non‑returnable once installed (industry‑standard policy).
- Always verify spa serial number and system pack label before ordering.
